Using ZFS

Using ZFS #

Installing the ZFS service #

The zfs service will install the kernel-headers for your kernel (if you build your own kernel, you’ll need to replicate this service), and then download the ZFS on Linux source, and build and install it. Then it will build a zfs-tools image that will be used to give you access to the zfs tools.

The only restriction is that you must mount your zpool into /mnt, as this is the only shared mount directory that will be accessible throughout the system-docker managed containers (including the console).

$ sudo ros service enable zfs
$ sudo ros service up zfs
# you can follow the progress of the build by running the following command in another ssh session:
$ sudo ros service logs --follow zfs
# wait until the build is finished.
$ lsmod | grep zfs

Note: if you switch consoles, you may need to re-run sudo ros service up zfs.

Creating ZFS pools #

After it’s installed, it should be ready to use. Make a zpool named zpool1 using a device that you haven’t yet partitioned (you can use sudo fdisk -l to list all the disks and their partitions).

Note: You need to mount the zpool in /mnt to make it available to your host and in containers.

$ sudo zpool list
$ sudo zpool create zpool1 -m /mnt/zpool1 /dev/<some-disk-dev>
$ sudo zpool list
$ sudo zfs list
$ sudo cp /etc/* /mnt/zpool1
$ docker run --rm -it -v /mnt/zpool1/:/data alpine ls -la /data

To experiment with ZFS, you can create zpool backed by just ordinary files, not necessarily real block devices. In fact, you can mix storage devices in your ZFS pools; it’s perfectly fine to create a zpool backed by real devices and ordinary files.

Using the ZFS debugger utility #

The zdb command may be used to display information about ZFS pools useful to diagnose failures and gather statistics. By default the utility tries to load pool configurations from /etc/zfs/zpool.cache. Since the BurmillaOS ZFS service does not make use of the ZFS cache file and instead detects pools by inspecting devices, the zdb utility has to be invoked with the -e flag.

E.g. to show the configuration for the pool zpool1 you may run the following command:

$ sudo zdb -e -C zpool1

ZFS storage for Docker on BurmillaOS #

First, you need to stop thedocker system service and wipe out /var/lib/docker folder:

$ sudo system-docker stop docker
$ sudo rm -rf /var/lib/docker/*

To enable ZFS as the storage driver for Docker, you’ll need to create a ZFS filesystem for Docker and make sure it’s mounted.

$ sudo zfs create zpool1/docker
$ sudo zfs list -o name,mountpoint,mounted

At this point you’ll have a ZFS filesystem created and mounted at /zpool1/docker. According to Docker ZFS storage docs, if the Docker root dir is a ZFS filesystem, the Docker daemon will automatically use zfs as its storage driver.

Now you’ll need to remove -s overlay (or any other storage driver) from the Docker daemon args to allow docker to automatically detect zfs.

$ sudo ros config set rancher.docker.storage_driver 'zfs'
$ sudo ros config set rancher.docker.graph /mnt/zpool1/docker
# Now that you've changed the Docker daemon args, you'll need to start Docker
$ sudo system-docker start docker

After customizing the Docker daemon arguments and restarting docker system service, ZFS will be used as Docker storage driver:

$ docker info
Containers: 0
 Running: 0
 Paused: 0
 Stopped: 0
Images: 0
Server Version: 1.12.6
Storage Driver: zfs
 Zpool: error while getting pool information strconv.ParseUint: parsing "": invalid syntax
 Zpool Health: not available
 Parent Dataset: zpool1/docker
 Space Used By Parent: 19456
 Space Available: 8256371200
 Parent Quota: no
 Compression: off
Logging Driver: json-file
Cgroup Driver: cgroupfs
Plugins:
 Volume: local
 Network: host bridge null overlay
Swarm: inactive
Runtimes: runc
Default Runtime: runc
Security Options: seccomp
Kernel Version: 4.9.6-burmilla
Operating System: BurmillaOS v0.8.0-rc8
OSType: linux
Architecture: x86_64
CPUs: 1
Total Memory: 1.953 GiB
Name: ip-172-31-24-201.us-west-1.compute.internal
ID: IEE7:YTUL:Y3F5:L6LF:5WI7:LECX:YDB5:LGWZ:QRPN:4KDI:LD66:KYTC
Docker Root Dir: /mnt/zpool1/docker
Debug Mode (client): false
Debug Mode (server): false
Registry: https://index.docker.io/v1/
Insecure Registries:
 127.0.0.0/8